Our G2 superglue is formulated to adhere to all smooth surfaces and is used with our black vinyl coated security plates.
One 2 gram tube will adhere 10 GN plates, or 6 GW plates.
The GT2 is recommended for adhering cable tabs, and works well with metal-on-metal connections with a gel consistency suitable for rough surfaces.
One 2 gram tube will attach 50 small cable tabs.
GX epoxy is recommended to fill gaps on very rough or highly curved surfaces where the flat cable tabs won't adhere with superglue.
The GX epoxy will attach the same quantities of tabs or plates as the G2 or GT2.
Following below is:
Download Brochure pdf (285 KB)
Download Price Sheet pdf (80 KB)
Online ordering is provided by Paypal.
If you prefer not to use Paypal, it's easy to place orders by phone,
and we also accept purchase orders by mail, fax, or email.
PRODUCTS
Super Glue
Superglue for coated plates
Our G2 superglue works best for plastic-to-plastic applications.
Superglue for metal tabs
GT2 Tufnut Superglue performs well with metal to plastic or metal fastenings, and is used to attach our superglue tabs to rough surfaces. Works with all plastics.
2 Part Epoxy
Epoxy is recommended for attachments between flat cable tabs and curved surfaces, where gaps occur that superglue lacks the bulk to fill. Our epoxy bonds especially well with plastic, and is suitable for anchoring cable tethers to remote controls. One 25 ml tube will fasten up to 100 small cable tabs, 70 medium tabs, or 50 GN security plates.
Two-part epoxy sets in about 4 minutes and should be mixed & applied in small batches. Functional cure occurs within an hour of application, with full-strength cure in 24 hours. The epoxy is more difficult to apply than superglue, but creates a flexible bond that will conform to a wide variety of surfaces.