Security fasteners can be added to most of our adhesive plates and anchors. Adding screws will increase the stability of a security anchor mount and can substitute for adhesive when mounting on wooden surfaces. The selection of screws below features two varieties of secure drive slots that prevent removal with standard tools.
One-Way Sheet Metal Security Screws can be installed with a regular flat blade screwdriver but cannot be removed. These are good for permanent installations. Available below in size 14 (1/4" OD) in the following length options: 1/2", 3/4", 1.0", 1.25", 1.50", 2.00"
Button Torx Sheet Metal Security Screws are installed with a custom driver and can also be removed with the same driver. They are good for securing property that is likely to be moved at a later time. Available below in size 14 (1/4" OD) in the following length options: 1/2", 3/4", 1.0", 1.25", 1.50"
Please call for additional options if you don't see what you need.
Security Nuts and Bolts - Please visit tufnutworks.com to see our expanded selection of security nuts and fasteners. It's best to purchase security fasteners there as a separate order, and office equipment security products here at www.tufnut.com. If you need a combination of products from both sites, please give us a call.
Online payments by credit card & PayPal.
Quantity discounts available-
Please call 800-227-0949 for a quote.
One Way Security Screw
One-Way Security Screws
One way security screws can be used to secure anything that can be screwed down.
They are fastened with a regular screw driver, but cannot be removed because of
the curved surfaces on the screw head.
In high-risk zones you can add these screws to our self-adhesive and GW plates.
Our most popular sizes are listed here, and you can special order different sizes and styles. These screws are Type AB thread forming screws commonly used in thin metal or wood.
There is a special removal tool available by phone to recognized customers that allows these screws to be removed.
Button Torx Screw Head
Torx Security Screws
Button Torx security screws can be used to secure anything that can be screwed down.
They are fastened with a special button torx driver, and can also be removed with that driver.
The screws have sheet metal screw threads which can be used with pre-drilled holes in either wood or metal.
This screw is used when it is likely you will need to remove the secured item but require a high security screw to protect your equipment.
In high-risk zones you can add these screws to our self-adhesive and GW plates. They can also be used with our remote control security cables.
Our most popular sizes are listed below, and you can special order different sizes. These screws are Type AB thread forming screws commonly used in thin metal or wood.
Magnetic security bits that fit any 1/4" magnetic screwdriver are used to install or remove the screws. Bits are available as an add-on to Button Torx screw sets. If you have a driver, just order 1 bit (MB) per 100 screws.