Remote Control Security Cables
Retractable & Coiled Cables

Remote Control Anchor

Remote Control Security System keeps VCR remote controls where they belong. The small tab end (1/2"x1/2") is glued to the remote, while the other is attached to your furniture.

This system is intended for equipment management, and low-risk theft protection. For higher security, please see our Coiled Remote Cable below.

This Remote Control System can be ordered with an unfinished loop, which you attach and complete to anchor the remote (GRXC4L). We also offer screw and glue options to anchor the cable end.

System requires 1 GT2 glue, which glues 50 tabs.

If glue is NOT included with the component, you'll need to order it separately.
This saves you money, since you can adhere up to 50 one tab or 25 two tab systems with one glue.
Glue requirements are on each product page.

New in 2008 - These cables can be ordered in BLACK !
Just choose the BK option, at no additional charge.

Page Top - Home

Remote Control Protector

Coiled Remote Security Cable is 1/8" thick by 5, 10 or 20 feet long, which makes it much longer and stronger than our remote control security anchor (above). It's available with a loop end, with a security screw end, or with 2 glue tab ends.

The coiled feature gives you flexibility to use the remote control without worrying about managing the cable. It's also suitable for securing microscopes and lab equipment.

The security cable attaches the small tab end (1/2"x1/2") to your remote with our GT2 Superglue. One GT2 superglue will attach up to 50 cable tabs.

If glue is NOT included with the component, you'll need to order it separately.
This saves you money, since you can adhere up to 50 one tab or 25 two tab systems with one glue.
Glue requirements are on each product page.

Page Top - Home

Small, Medium and Large Tabs
on Coiled Cables

While our small tab ends have made the remote cables very popular, there are situations where larger cable ends are desirable. For comparison, our normal small tabs measure 1/2" x 1/2" square while our new medium tabs are 3/4" x 1" and our large tabs are 1" x 2". The larger size makes using self-adhesive tape possible, which means these tabs can be removed if needed.

Our Coiled and Straight Cable Options page lets you create your own cables with these new tabs.

The tab ends are as follow:

BA= Large Self-Adhesive Tab $2.00 / BS= Large Superglue Tab $1.50
MA=Medium Self-Adhesive Tab $1.50 / MS=Medium Superglue Tab $1.00

Retractable Cable Recoiler

These retractable security cables recoil when not in use, which reduces cable clutter. They all come with our small superglue tabs which attach to your property. The clear vinyl-coated 1/16" thick cables are 3-feet long. The retractor is anchored to your furniture with a choice of a self-adhesive anchor, superglue, a wire cable, or a security screw.

RC3A uses a self-adhesive adapter that adheres the retractor to your furniture

RC3W is a 6 inch wire anchor cable that goes around or through other furniture. You then crimp the cable sleeve (included) to the cable with your vice-grip tool to anchor the retractor. If you need a longer wire anchor cable, just give us a call to place your order.

The screw options include a one-way security screw (RC3SO) or Phillips screw (RC3SP) inserted through the retractor and screwed into your furniture.

RC3GT2 anchors the recoiler using superglue for permanent anchoring.

RC3 is the recoiler only, with no anchor mounting device.

The cables come with a cable clip that can be used to clamp and hold the extended cable from retracting.

We can add length to this device by supplying a longer wire anchor cable, or by adding a length of cable (that does not retract) to the securing cable. You can create your own loop end on the securing cable using this same approach.

If you need modifications to these systems, please give us a call at (800) 227-0949 to place your order...

Page Top - Home